View source for Community:SteamVR Bindings

{{Noticebox/Community}}
{{Noticebox/wip|}}

TODO

[https://docs.vrchat.com/docs/steamvr-input-20 Official VRChat SteamVR Input 2.0 documentation]<ref>https://docs.vrchat.com/docs/steamvr-input-20</ref>

[https://docs.vrchat.com/docs/input-20-faq Official VRChat SteamVR input 2.0 FAQ]<ref>https://docs.vrchat.com/docs/input-20-faq</ref>

==Where to find==
TODO

==Glossary==
{| class="wikitable"
|+
!Terms
!Explanation
|-
|Bindings
|A complete set of bindings between inputs and actions that can be saved and shared in the Steam Workshop.
|-
|Action
|Behavior that can be bound to inputs or chords, like movement, selection, or bringing up the camera or personal mirror.
|-
|Action Set
|A group of actions that corresponds to a specific context, like using the menu or action menu, or global actions that are available in any context.
|-
|Control Source
|A specific actuator on a controller, like a joystick, trigger, button, or trackpad.
|-
|Control source mode
|A mapping that defines how a control source's movements or sensors are interpreted as inputs. 
For example, a trackpad can be mapped as dpad or a button, and a joystick can be mapped as joystick or scroll wheel.
|-
|Input
|A specific movement or sensor reading from a control, interpreted through a control source mode. 
For example, a button's control source mode might provide touch, press, hold, or double-press inputs.

|}
From the [https://docs.vrchat.com/docs/steamvr-input-20#bindings-glossary official docs.]

==Walkthroughs==

=== Adding new inputs ===
TODO

=== Double tap menu ===
TODO

=== Creating Chords ===
TODO

=== Dead zones ===
TODO

=== Trigger thresholds ===
TODO

=== Changing haptics ===
TODO

=== DPAD overlap percentage ===
TODO


== Don'ts ==
TODO: Certain changes can cause issues, such as binding a double click action to an existing button with drop assigned to single will stopping auto-hold from working


== Controller info & fixes ==

=== All ===

==== Can't do gestures at all ====
By default coming into the Input 2.0 update, gestures were set to disabled.

TODO: walkthrough showing how to enable them in the radial menu

==== Disabling new hand poses / finger tracking ====
TODO: add an image pointing out the toggle in the controls section of the main menu.

==== Default & Community bindings ====
TODO: guide to the binding select page with an image. 

TODO: Link to SteamVR beta for a fix on community bindings (remove later when fixed)

==== Hard bindings reset ====
In rare cases, a full hard reset of your bindings may be needed due to issues with SteamVR. 

TODO

=== Vive ===
Vive is a little special, two default binding modes are available with different feature sets. (TODO: write about them) 

==== No touch to move / Emotes are "sticky" ====
It's likely that you previously used Vive Advanced controls before Input 2.0. You can restore Advanced behavior you're used to by switching from '''Default Bindings''' over to the '''Default Advanced Bindings''' which can be found on the bindings select page. 

==== Difficulty moving ====
The default thresholds for movement on Vive controllers require you to hit the very edges of the touchpad. This can be changed by adjusting Dead zones.

TODO: Recommended values for Simple & Advanced

==== Accidental jumping ====
With a mix of adjustments to Overlap percentage & Dead zone on the Trackpad DPADs, you can restore pre-Input 2.0 behavior.

TODO: Recommended values for both

==== Grip isn't doing hand open / Isn't clearing gestures ====
This seems to be an oversight with Vive Advanced Bindings, you'll need to add the Gesture_wheel_cancel_open_left & right actions to your grips as a Button press inputs.

TODO: image showing what the newly added button should look like

=== Index ===

==== Easier item holding / Auto Hold ====

=== HP Reverb G2 ===



TODO: More controller types, need users with more experience on other types.

== References ==
<references />