Controls

V · EGetting Started in VRChat

Getting Started • Menus • Controls • Safety • VRChat+ • Troubleshooting • Resources • FAQ

Template:Noticebox/official You may customize your controls in the Settings menu. Depending on the platform you are using VRChat on, you may be able to customize controls further by using the settings menu for your device.

The Settings menu also documents the button mappings for the device you’re currently using.

VR Controls

VRChat officially supports the following headsets and their corresponding control schemes.

• Meta Quest headsets
  • Meta Quest 2
  • Meta Quest 3
  • Meta Quest Pro
• HTC Vive XR Elite
• Pico 4

In addition, VRChat supports these headsets in PCVR mode, where your headset is connected to a Windows gaming PC.

• All SteamVR-compatible headsets, including (but not limited to)
  • Valve Index
  • HTC Vive series
  • Bigscreen Beyond
  • Tethered Pimax HMDs
  • Any Steam Link compatible HMD (Meta Quest series)
  • Any Virtual Desktop compatible HMD
  • Most ALVR compatible HMDs

On PC, we also support gamepad input via Steam’s Input manager.

Controller Buttons

Most VR controllers are laid out similarly. Each controller has a joystick and two main buttons, a system button, a trigger, and a grip button.

Button	Assignment
A - right hand, bottom button	Jump
B - right hand, top button	Press: Quick Menu Hold: Action Menu
X - left hand, button button	Press: Mute/Unmute
Y - left hand, top button	Press: Quick Menu Hold: Action Menu
Grip - Middle finger pull	Pick up
Trigger - Index finger pull	Use
Right Thumbstick	Turn
Left Thumbstick	Move / Locomote
Both Triggers + Both Menu Buttons	Enable Safe Mode

Hand Tracking

There is a tutorial world to learn hand tracking in a kinesthetic environment!

To use hand tracking, just put down your controllers and put your hands out so the Quest hand tracking system kicks in. Of course, make sure you have the system enabled in the Quest settings.

To move around the world, hold your left hand up, palm facing your face. Touch your middle finger to your thumb in a “pinch” motion, and a small blue sphere will appear. While still pinching, move your fingers away from that sphere, and you'll move in that direction!

To turn left and right, do the same motion with your middle finger to your thumb, but with your right hand. While still pinching, move your fingers left or right. You'll turn!

You can turn with Comfort Turning (snap turning) on or off. If you have Comfort Turning on, you'll need to move your pinched finger “past” the turn point each time you turn. It might be easier to use this locomotion method with Comfort Turning disabled in your settings.

Pull up your VRChat Quick Menu by “pinching” your index finger and your thumb on your left hand. This is a “default” Oculus gesture, you'll see a little menu icon float over your hand and “fill up” as you long-pinch. To interact with the UI, point at it with your hand, and select things by pinching your index and thumb together.

You can mute yourself by holding your thumb and ring finger together for a moment on your left hand.

Desktop Controls

You can play VRChat using a keyboard and mouse.

Movement is handled via the standard FPS “WASD” setup. Your mouse adjusts your view position. Your head points in the direction you’re looking.

Key	What it does
W	Moves player forward
A	Moves player left
S	Moves player back
D	Moves player right
Space	Makes player jump (if it is enabled in the room)
Z	Crawl/Go Prone
C	Crouch
R	Opens Action Menu
Escape	Opens Quick Menu
Shift	Sprint
Left Click	Interact / Pickup
Right Click (Hold)	Shows interaction mouse
Right Click	Drop pickup
Right Click + F (Hold)	Allows you to throw held pickups
V (Hold) (If using push to talk)	Enables microphone as long as it’s held
V (If using toggle talk)	Enables / Disables microphone
Y	Opens chatbox text input
End	Toggles AFK mode
Control + N	Toggles visibility of player nametags
Control + H	Toggles visibility of the HUD (microphone and notification icons)
Control + \	Local switch to default robot avatar (good for when unable to access menu or see out of avatar)
RShift + Backtick + 1 †	Toggles visibility of trigger debug menu
RShift + Backtick + 2 †	Toggles visibility of information debug menu
RShift + Backtick + 3 †	Toggles visibility of console debug menu
RShift + Backtick + 4 †	Toggles visibility of networking debug menu
RShift + Backtick + 5 †	Toggles visibility of networking graph debug menu
RShift + Backtick + 7 †	Toggles visibility of networking debug overlay
RShift + Backtick + 8 †	Toggles visibility of event debug overlay
RShift + Backtick + 9 †	Toggles visibility of user networking debug overlay
F12	Takes screenshot, saved to the folder VRChat is installed
Control + F12	Takes screenshot at double the normal resolution, by default 4K (3840 × 2160), saved to the User’s Pictures/VRChat folder
Shift + F1*	Hand gesture - Idle
Shift + F2*	Hand gesture - Fist
Shift + F3*	Hand gesture - Open Hand
Shift + F4*	Hand gesture - Point
Shift + F5*	Hand gesture - Victory (Peace)
Shift + F6*	Hand gesture - Rock ’n Roll
Shift + F7*	Hand gesture - Finger-gun
Shift + F8*	Hand gesture - Thumbs up
Shift + F11*	Enables Safe Mode.
< and >	Rotate the player left and right in.
I / K	Adjusts pitch of the held object (rotate along X axis)
J / L	Adjusts yaw of the held object (rotate along Y axis)
U / O	Adjusts roll of the held object (rotate along Z axis)
Mouse Wheel	Moves the held object forward/back (translate along Z axis)
Middle Mouse Button (Hold)	Adjusts object rotation by moving the mouse

* Use left shift to control your left hand, use right shift to control your right hand.

† On a standard English US QWERTY layout keyboard, “backtick” is the key in the top left, next to the 1 key. It shares a key with the tilde (~) character.

Debug options are disabled unless you launch VRChat with the --enable-debug-gui launch option.

Mobile Controls

On the left side of the screen is a virtual joystick, which will move your avatar around. Tapping and dragging on the screen will move your point of view. Double tapping and holding anywhere on the screen will let you walk around and move your viewpoint simultaneously.

The right side of the screen has buttons for jumping, picking up items, and interacting with the world. Holding down the button will allow for further options, such as an action menu, or crouching.

Tapping on a player or a portal will instantly bring up a secondary menu.

Gamepad Controls

You can play VRChat using a gamepad on PC and Mobile.

Typical controllers supported include Xbox controllers, Dualshock controllers, and Nintendo Switch controllers.

Buttons (Based on Xbox Controller)	Assignment
A	Makes player jump (if it is enabled in the room)
B / X	Drop pickup
Y (Hold) (If using push to talk)	Enables microphone as long as it’s held
Y (If using toggle talk)	Enables / Disables microphone
D-pad Up	Toggles visibility of player nametags
D-pad Down	Toggles visibility of the HUD (microphone and notification icons)
LB (Hold) + Left Joystick	Moves the held object forward/back (translate along Z axis)
LB (Hold) + Right Joystick	Rotates the held object
RB (Hold) + Left Joystick	Select left hand gesture (Only Available on Steam)
RB (Hold) + Right Joystick	Select right hand gesture (Only Available on Steam)
LT/RT	Interact / Pickup
Left Joystick	Moves player
Left Joystick Click	Crouch
Left Joystick Hold	Crawl/Go Prone
Right Joystick	Looks around
Right Joystick Click	Opens Action Menu
View	Takes screenshot, saved to the folder VRChat is installed
Menu	Opens Quick Menu
A / RT (In Menu)	Click in Menu
B (In Menu)	Closes Menu

TODO: short info about the camera here. ~DAG-XR 2024/06/03 03:55 UTC

Resources

• "Quest 2 Finger Tracking" by VRChat on YouTube
• "VRChat 2022.4.1" on Hand Tracking at docs.vrchat.com